Advantage
Gripware, Inc.
Telephone: (334) 863-4488
e-mail: sales@advantagegrip.com
Fabic Characteristicas:
Fabric may be washed in warm water with a standard detergent. Hand washing is recommended.
Machine washing is possible after all ties have been removed and it is carefully inspected to assertain that
there are no rips, tears or holes, as these will most certainly become bigger in the washing process.
Machine settings must be Gentle Cycle, Warm Water. For large Overheads use a Large Capacity
Machine.
To dry, block on the proper size frame, not in direct sunlight. Machine dry on Gentle Cycle, with low
temperature setting.
DO NOT DRY CLEAN!
Advantage Gripware, Inc. assumes no responsibility for any damages incurred in the cleaning process.
TEXTILE TYPE: HALO SILK - BLACK
Order Code Suffix: .04B
Width: 60”
Light Loss : 5.0 Stops
Light Loss 5.0 Stops :
Light Pattern trough Fabric
Safety**: SE
Primary Use:
Medium diffusion of light which produces softer shadows
and is more flattering to facial features by seeming to
smooth wrinkles and lines.
Fabric Cleaning:
.04 / HALO SILK - BLACK
Our Halo Silk is also known as Artificial Silk or Full Silk. It is a woven 100% Polyester fabric.
Available in:
There are many variables in calibrating light loss for Technical Textiles, such as the size of the diffusion, the
distance of the light source to the diffusion, the distance of the diffusion to the subject or measuring device, the
amount of ambient bounce not only produced by the diffusion itself, but other surrounding reflective surfaces,
multiple light sources, etc. Then of course there is the light meter used in the calculations.
Because of all the variables, we suggest that these calculations be used only to compare diffusion materials to each
other.
Don't assume that our calculations will be the same for similar materials from other manufacturers, as many of our
sources are not the same.
It is also not a good idea to compare different manufacturers light loss results, as their means of measuring may be
completely different.
We tested using two different methods. In each case the parameters are exactly the same for all Technical Textiles.
** The FR (Flame Retardant), IFR (Inherently Flame Retardant) and SE (Self Extinguishing) designations do NOT mean
that these Fabric won't burn! In the case of FR, the fabric is treated with flame retardant chemicals, which will
deminish with time and when subjected to damp or wet situations. IFR means that the fiber used in weaving the fabric
is non combustible. This protection is there for the life of the fabric. Some of these fabrics WILL melt, eventhough
both FR and IFR textiles have met or surpassed the standards of NFPA 701. SE (Self Extinguishing) fabrics will burn a
bit longer than those with the NFPA 701 certificate, but self extinguish once the external flame source is no longer
present. In all cases, the melted liquid is extemely hot and stays hot well after flames are extinguished and can cause
serious burns! NFR fabrics are NOT treated and must be used with extreme caution
INDIVIDUAL FABRIC SPECIFICATIONS
