Advantage
Gripware, Inc.
Telephone: (334) 863-4488
e-mail: sales@advantagegrip.com
Fabic Characteristicas:
Surface cleaning is preferred. If washing is required, hand wash in cold water with soap or detergent,
after the unit has been carefully inspected to be certain that there are no rips or tears and that all strings
have been removed. Dry on appropriate size frame.
DO NOT DRY CLEAN!
Advantage Gripware, Inc. assumes no responsibility for any damages incurred in the cleaning process.
Fabric Cleaning:
.68 / HALF SOFT FROST
Half Soft Frost is an extruded pvc, non woven. Because it does not have fibers, it tends to tear where the
needle has punctured the material when it is sewn. We minimize this by applying a special tape to sew
through. This tape is designed to have very little adhesive leak in hot conditions.
Available in:
Light Pattern trough Fabric
TEXTILE TYPE: HALF SOFT FROST
Order Code Suffix: .68
Width: 54”
Light Loss : 1/3 Stops
Light Loss 1.0 Stops
.0 Stops
Safety**: NFR
There are many variables in calibrating light loss for Technical Textiles, such as the size of the diffusion, the
distance of the light source to the diffusion, the distance of the diffusion to the subject or measuring device, the
amount of ambient bounce not only produced by the diffusion itself, but other surrounding reflective surfaces,
multiple light sources, etc. Then of course there is the light meter used in the calculations.
Because of all the variables, we suggest that these calculations be used only to compare diffusion materials to each
other.
Don't assume that our calculations will be the same for similar materials from other manufacturers, as many of our
sources are not the same.
It is also not a good idea to compare different manufacturers light loss results, as their means of measuring may be
completely different.
We tested using two different methods. In each case the parameters are exactly the same for all Technical Textiles.
** The FR (Flame Retardant), IFR (Inherently Flame Retardant) and SE (Self Extinguishing) designations do NOT mean
that these Fabric won't burn! In the case of FR, the fabric is treated with flame retardant chemicals, which will
deminish with time and when subjected to damp or wet situations. IFR means that the fiber used in weaving the fabric
is non combustible. This protection is there for the life of the fabric. Some of these fabrics WILL melt, eventhough
both FR and IFR textiles have met or surpassed the standards of NFPA 701. SE (Self Extinguishing) fabrics will burn a
bit longer than those with the NFPA 701 certificate, but self extinguish once the external flame source is no longer
present. In all cases, the melted liquid is extemely hot and stays hot well after flames are extinguished and can cause
serious burns! NFR fabrics are NOT treated and must be used with extreme caution
Very light diffusion of light which produces soft shadows and
is more flattering to facial features by seeming to smooth
wrinkles and lines. Introduces some ambient bounce.
INDIVIDUAL FABRIC SPECIFICATIONS
